|
Installation
information
Connect one inlet pressure flow and one actuator to ports ‘V’,
and one pressure and actuator to ports ‘V1’ allowing both
flows straight through the valve. Pressure gauges can be fitted.
Port ‘M’ will show the pressure on line ‘V - V’
and port ‘M1’ will show the pressure on port ‘V1
- V1’.
Features:
• Aluminium Body
• VMDI 35 Cartridge Relief range 40 to 210 Bar
• Pressure gauge ports M&M1 1/4 B.S.P.P
• VMDI80 Cartridge Relief range 20 to 260 Bar
|
Operation:
When the pressure on line ’V’ exceeds the spring setting,
the valve opens and allows flow to the line ‘V1’ and vica
versa. To adjust the setting of the spring, remove the cap from the
end of the cartridge and adjust clockwise to increase the setting
and anti-clockwise to reduce the setting. |
