Installation information
The inlet flow from directional control valve connects to ‘V1’
and ‘V2’. Ports ‘C1’ and ‘C2’ connect
to the actuator.
Features
• Steel Body
• Yellow Zinc Plated
• No Leakage
• Internal Components Hardened
• Spring Setting Range 60 - 350 BAR
|
Operation
When pressure flow passes from ‘V1’ to ‘C1’ it
controls the actuator port. At the same time an internal pilot signal
is made from ‘V1’ to ‘C1’ line which controls
the opening of ‘V2’ to ‘C2’ line which controls
flow to its connecting actuator port. When pressure flow is directed
at ‘V2’ port it performs the opposite function.
Note : The valve should be set 30% above max load induced pressure.
Max working pressure 270 Bar. Pilot ratio 1:4.25 |
